Secure Checkout
Same Day Shipping! For most in stock items if order received by 2PM EST
Easy Product Returns within 30 Days and Secure Shopping for your safety.
Your Shopping Cart Is Empty

Secure Checkout

Cables Blog

Learn what patch cords are and how to use them.

Selecting, installing and maintaining the right patch cord can improve the performance of your network and help ensure as much uptime as possible.


A patch cord, patch cable or patch lead is an electrical or optical cable of predefined length used to connect ("patch in") one electronic or optical device to another. Even though patch cords are quite common, they perform an important part in transmitting data signals within the LAN (Local Area Network). An Ethernet cable and a patch cable can be the same, but the latter is usually shorter.

One common use of patch cords is to connect a laptop or desktop computer to a wall jack. In a Data Center, patch cords are used to connect equipment in one rack or enclosure to equipment on another shelf of the same rack, or to equipment on a different rack or enclosure.

Copper Patch Cords
Copper patch cords can be STP (Shielded Twisted Pair) or UTP (Unshielded Twisted Pair) and have an RJ45, TERA or GG45 connector on both ends, although hybrid versions exist that have different types of connectors. They are either made with solid or stranded copper and typically shorter than other connector cables due to potential signal loss. A copper patch cord with a smaller outside diameter takes up less space and has a smaller bend radius. This allows it to be installed in smaller areas.

Fiber Patch Cords
Fiber patch cords, also called fiber jumpers, are made of fiber optics with connectors at both ends. The caps allow the cord to be rapidly connected to an optical switch or other telecommunications or computer device. It is also used to connect an optical transmitter, receiver or terminal box.

Potential Problems with Patch Cords

Bit error rate in copper patch cords can affect transmissions, slow down computer operations, prevent signal communication and even alter data signals.

Signals can also “leak” and weaken the transmission. In addition, RFI (Radio Frequency Interference) and EMI (Electromagnetic Interference) can interfere with the signal, causing an increase in bit error rates.

Fiber patch cords have other problems including broken fibers due to too much tension or bending, insufficient transmitting power, excessive signal loss due to a cable that is too long, a faulty connector and faulty splices.

Homemade Patch Cords
It is difficult to build homemade patch cords. The twisted pairs must maintain their twists as close as possible to the RJ-45 connectors, and the connectors must be high quality for the best signal carrying capabilities. Homemade patch cords that don't meet specifications can cause problems.

Patch cords can be as short as 3 inches (8 cm) to connect stacked components or as long as twenty feet (6 m), depending on the type and use. Fiber patch cords are available in lengths of 2 m, 3 m, or 5 m. It´s always wise to keep your patch cords as short as possible without creating undo strain on the connectors.

Testing Patch Cords

A “Channel Test” involves patch cords while a “Permanent Link Test” does not.

If you are troubleshooting an existing network or need to find out if it will support an application, channel testing is advised. If you are testing a new network or new connections, you will want to know if the cable performs to standards. In that case, the Permanent Link test is the recommended testing method.

The bottom line is that selecting, installing and maintaining the right patch cord can improve the performance of your network and help ensure as much uptime as possible.

Patch cords link switches, hubs, modems, and other devices together in a network environment.

Recent Posts

Business Benefits of Fiber Internet Connectivity

Ethernet Cables: A Brief History

Signs That an Ethernet Cable Isn’t Working Right

How to Increase Office Internet Speed

Qualities of a Great Structured Cabling System

What Are the Benefits of Ethernet Segments

Tips for Selecting a Structured Cabling Contractor

Ethernet vs. Patch Cables: What’s the Difference

The Different Types of HDMI Connectors

Benefits of an Up-to-Date Network Diagram News and Information

Tips for Selecting a Structured Cabling Contractor
The Role of IT in Supporting Quality Healthcare.
Why Do Ethernet Cables Come in Different Colors?
Sell Network Cables and Cords Through Our Dropship Program
The Science of Patch Cords
When It's Time to Use Fiber-Optic Cable
A country's ambitious plan to teach anyone the basics of AI - Finland - From MIT Tech Review with Datacomm Cables


A/V Cables
Apple Products
Artificial Intelligence
Audio/Video Cables News and Information
Cat5e / Cat6 Cables
Category 7 Ethernet Cables
Cell Phone Cables
Custom Cables
Custom Fiber Optic Cables
Data Center
Datacomm Cables
Fiber Optic Cables
HDMI Cables
Internet of Things (loT)
Keystone Jacks
Market Reports
MIT Technology Review
Network Patch Cables
Network Patch Cords
Network Topology
Online Learning
Patch Finder
Patch Panels
Power Cables
Power Cords
Signal Conversion
Solution Provider
Supply Chain
USB 3.0 Cables


August, 2020
July, 2020
June, 2020
May, 2020
April, 2020
March, 2020
February, 2020
January, 2020
November, 2019
October, 2019 more...

Looking for older posts? Click Here for the old blog.