This is a high end product. It is specifically designed to accept RG59 cables with a range of .195 to .245. It has basically the same internal cone design as the Uni-Crimp. Except inside of a external hex crimp this employs a 360 degree plastic insert completely capturing the cable components to the inside walls of the connector. The plastic compression sleeve is tapered such that it will fill ALL available space (and then some) to produce a cable retention that is far superior to any and all connector designs. Once this connector is properly installed it CAN NOT BE PULLED OFF---EVER!!! The connector also has internal O rings to seal the mating surface from water wicking up the cable. A properly mated pair of F connectors are completely WATERPROOF and have been tested in a 3 foot head of water. The concept was to develop a line of products that would be used by the installer of CATV, CCTV and Home Theater systems, using one assembly procedure and one crimp tool for F, RCA and BNC connectors. This connector will cost more than the previously discussed items but there will never be a service call as a result of this connector.
BNC Compression Seal Connector - 10 Pack
MFG part#: 302-N2CSTP BNC Compression Seal Connector - 10 Pack