Saf-D-Grid Power Cords

SAF-D-GRID® Power Cables AC / DC

These power cords connect devices carrying AC or DC currents up to 30A and 600V in the footprint of an IEC 620 C13/C14 and is the only connector system that is UL rated for disconnects. UL Rated to 400V and 30A.

• Meets International safety requirements for hazardous, low voltage applications including UL 950 and IEC 60950
• Allows for greater density of power by letting up to 600V DC and 40A or AC in the same space of IEC 320 C13/14 systems that have limits of 10A to 250 VAC
• Saf-D-Grid® 400V targets DC applications but is also rated for AC current with a single keying configuration
• Saf-D-Grid® 300V targets AC applications and is rated for DC with multiple mechanical keys

Shop SAF-D-GRID® Power Cords

---

Other Information About SAF-D-GRID® POWER CORDS

First Mate, Last Break Ground Contact - Provides the safety of an earthing path before engagement of the power contacts.

Integral Latch - Connectors cannot be accidentally unmated, preventing unwanted power loss to critical equipment.

Hot Plug Rated - The connectors are rated for current interruption for both electronic (capacitive) and electrical (resistive) loads.

Touch Safe / Shock Protection - Minimizes the risk of personal contact with a hazardous voltage. Passes UL & IEC finger probe (plug & receptacle) and 3mm probe tests (receptacle).

Arcing Protection - Housings contain the arc if connectors are mated or unmated while under load minimizing risk to personnel.

FREQUENTLY ASKED QUESTIONS ABOUT SAF D GRID POWER CORDS

What is SAF D grid?
Anderson Power states that thes power cords build on the proven contact technology used in SB and Powerpole® connectors by offering features required in 380-400VDC power distribution systems. Saf-D-Grid connector systems created as a safe appliance power connector for server, telecommunication, and other devices up to 600 VDC.

Are Saf-D-Grid Power Cords compatible with the IEC 320C13 and C14 connection systems?
YES!

Are Saf-D-Grid Power Cords Powerful?
YES! It is the only connector system so sized that is UL rated for current interrupt of up to 400 VDC and 30 amp load. Saf-D-Grid also enables greater power density by allowing up to 30A and 600V (disconnect) DC or AC within the same space of the IEC320 C13 & C14 system that is typically limited to 10A and 250 VAC. This allows the use of Saf-D-Grid in AC systems that require more power by increasing the wattage capability within the existing connector space.