Search
Easy Product Returns within 30 Days and Secure Shopping for your safety.
Same Day Shipping


The majority of businesses, these days, require network connectivity and use computers. That is the reason why it is imperative for these networks to be reliable and fast. When you improperly install the cables, performance will always be slowed down.

by


The majority of businesses, these days, require network connectivity and use computers. That is the reason why it is imperative for these networks to be reliable and fast. When you improperly install the cables, performance will always be slowed down. Your business operations will also be affected as well as the creation of maintenance costs. The ultimate end is the result of hidden costs.

For you to set up a functional network, you can run the cables to involve working outdoors, indoors, or in tight and small spaces. Installing cables can be time-consuming and challenging even for the most experienced. In some occasions, they often make mistakes.

Read below on how to avoid such cabling states if you are planning to deal with cables.

  1. Forgetting to Secure Cables During a Cabling Installation

You will be required, throughout your dealing with cables, to install network cables for companies that are in a hurry to have their networks running in operation. You might leave some aspects of installations overlooked when you are having the pressure of having a functional network as soon as possible. You can also forget to see the common mistakes done during the cable installation.

While you want to be sure that these cables are not left out unrecognized and scattered it is critical to do so even if it is time-consuming. These cables, over time, can stretch under their weight to have an effect on efficiency. Slower networks are affected by the stretched cables.

  1. Ignoring Network Cabling Regulations and Laws

Following the proper regulations and laws is imperative whenever you are installing cables. However, some people end up overlooking some of these statutes and regulations for reasons of costs and time savings. Ignoring these regulations and laws, however, is one of the risks that you should never take.

When a PVC-coated valve is under installation in the crawl or roof spaces, they are often highly toxic during the events of emergencies are fires. This is a reaction even when no one is harmed as a result of the accidents. In the cases of malpractice, companies are often subject to fines. In some cases, they will be forced to rip off the cables from their installation.

  1. Installing Cables Parallel to the Electric Cables

Once you are marked as a network cable installation specialist, you must have performed some special installations. You will also notice that some of these office environments contain plenty of electrical wirings around. For this reason, it is imperative to be sure that these data cables are never laid out parallel to the electricity cables.

Network cables are always formed by twisted wires. This is a type of wiring where two wire conductors are also twisted together to cancel out the electromagnetic interference (EMI) from other external sources. This is the best way they are made to prevent these network cables from causing interference with each other. However, thy hold a magnetic field that is often generated by the small voltages that are running in them. If you have the electric cables running parallel to the network cables high chances are that the EMI field will be interrupted. For this reason, the result will be a slower or lower quality transmission.

Looking for older posts? Click Here for the old blog.

Patch Finder

Find the Cable you need Quickly by using our Patch Finder

Cables News & Updates

Find discounts, industry news, site updates, and more in our blog.

Thomas Supplier
Datacomm Cables is a distributor and manufacturer of fiber optic, networking, and ethernet cable and stocks cabinets, racks and patch panels.
Datacomm Cables Inc. 120 Marcus Blvd Deer Park, NY 11729 Ph: 1-631-617-5190