Xantech 789-44D One Zone In-Wall Connecting Block

Overview

The Model 789-44D is a single gang, in-wall version of the 789-44 Connecting Block and is trimmed with a standard Decora style cover plate (not included). Allows the connection of Xantech IR Receivers and Keypads to four emitters, with a power supply, in infrared repeater systems.

It can also provide emitter expansion for various Xantech devices, such as the 590, 710, 796-20, and others. The STATUS terminal provides a convenient connecting point for voltage to drive STATUS indicators on certain Xantech products, such as the 780-80 IR Receiver.

Highlights:

• Similar to the standard 789-44 but used in a J-box configuration
• Can be used at either end of an infrared buss system
• Four parallel emitter ports on external connecting plate
• Quick connect stereo mini jack for Xantech IR receivers
• 4-terminal plug in connector on the back of the plate for Power and IR Signal
  

Specifications:

• Inputs: 1 - Screw-type, 4-terminal plug-in. 1 - IR RCVR, 3.5mm stereo mini jack
• Outputs: 4 - Emitter ports (3.5mm mono mini jacks) parallel driven
• Contains a 470-Ohm resistor in series with each emitter output
• Xantech 282, 283, 284 & 286 series Emitters may be used
• Power: 12 volts DC, 2.1 mm coaxial power jack. Use a 781C-00 or 782-00 Power Supply. Note: Don NOT connect a power supply to the 789-44D when it is used as an emitter expander only