Products |
Cables |
U.S. Government Agencies and Schools can fax orders to (631) 617-5184.
Xantech 789-44 One Zone Connecting Block
MFG part #: 789-44
Xantech 789-44 One Zone Connecting Block
Overview
The 789-44 provides a quick, low cost way of connecting Xantech IR receivers and keypads to four single or four dual emitters, with a power supply, to create an infrared repeater system.
It can also provide emitter expansion for various Xantech devices, such as the 792-10, 795-20, 796-20, and others. The STATUS terminal provides a convenient tie point for voltage to drive the STATUS indicator on certain Xantech products, such as the 780-80 IR Receiver.
Highlights:
Overview
The 789-44 provides a quick, low cost way of connecting Xantech IR receivers and keypads to four single or four dual emitters, with a power supply, to create an infrared repeater system.
It can also provide emitter expansion for various Xantech devices, such as the 792-10, 795-20, 796-20, and others. The STATUS terminal provides a convenient tie point for voltage to drive the STATUS indicator on certain Xantech products, such as the 780-80 IR Receiver.
Highlights:
- Connects four emitter ports and power supply to all Xantech infrared receivers and keypads
- Four parallel emitter ports with 470 Ohm resistors drive 4 single or 4 dual emitters
- Quick-connect stereo mini jack
- STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED's
- Inputs: 1 - Screw type 4-terminal plug-in. 1 - IR Receiver "IR RCVR" 3.5mm stereo mini jack
- Outputs: 4 - Emitter ports (3.5mm mono mini jacks) parallel driven
- Contains a 470 Ohm resistor in series with each emitter output
- Xantech 282, 283, 284 & 286 Mini Emitters may be used
- Power requirements: 12 volts DC. Uses 781RG or 782-00 Power Supplies. Note: Do NOT use a power supply to the 789-44 when it is used as an emitter expander *2.1 mm coaxial power jack
button.
