Enables enterprises to power network devices directly over the existing CAT5 data connection. The Power over Ethernet (POE) converter emulates IEEE 802.3af™ Power Sourcing Equipment (PSE), and is compatible with Powered Devices (PD) that comply with the draft IEEE 802.3af™ standard. The Power over Ethernet (POE) converter will detect the presence of a device that needs power and inject the applicable current into the data cable.
Attractive solution for delivering power over CAT5 to powered devices such as access points, Voice over IP (VoIP) products, access servers, outdoor routers, and internet kiosks.

Features 48VDC input power supply -48VDC output per port 12W max load Overload protection PD Auto-sensing Enable/Disable power MDI Auto-Negotiation (802.3u) Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link. Link Pass Through Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.

Specifications Standards IEEE Std 802.3™ Fiber Optic Connector Specs Multimode Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -32.5 dBm Max In PWR: -14.0 dBm Link Budget: 13.50 dB Switches S1: MDI Power UP = enable; DOWN = disable S2: MDI LinkAlert UP = enable; DOWN = disable Dimensions Width: 7.3" (185 mm) Depth: 4.4" (112 mm) Height: 1.2" (30 mm) Power 48VDC +/- 5% @ 1A maximum Operating Temperature 0 – 50°C (32 – 122°F) Storage Temperature -25 – 85°C (-13 – 185°F) Environment 5 – 95% humidity non-condensing; altitude 0 – 10,000 ft. Shipping Weight 2 lbs. (0.9 kg) Compliance UL listed; UL-Listed (Canada); CISPR/EN55022 Class A; EN55024 Class A; CE Mark Warranty Lifetime