| PRO-10 Wire Cable Tray System |
|
|
|
- Requires NO bending or cutting; ready–made 4-way, “T” and “L” shaped
junctions
- Conforms to the National Electric Code, UL Classified
- Acts as a continuous ground conductor; no grounding splices
- Adapts to difficult architectural designs to accommodate changes in
direction and elevation of cable runs
- Cuts installation time up to 50 percent
- Provides strength, rigidity without additional hardware; has smooth
edges
- Manufactured in an array of protective, powder-coated, colored
finishes to minimize corrosion
- All support hardware available
- Powder coating is standard finish
- Custom sizes available
Innovative Design
PRO-10's innovative design is based on pre-fabricated
junctions/intersections and the ability to provide powder coated finishes
while maintaining ground. The design eliminates the need to cut or bend
sections or install a separate ground wire. PRO-10 is UL classified as to
its suitability as an equipment grounding conductor only.
No connecting hardware required. All support hardware available. Powder
coating is standard finish.
Custom sizes available.
Installation
PRO-10's wire cable tray systems require only one tool and very few
accessory items for
installation. Pre-fabricated junctions/intersections reduce man-hours by
eliminating cutting and fabrication in the field. With center hung trapeze,
wall or floor mount accessories, PRO-10 is prepared to handle the toughest
installations. |